短脉冲激光加热模型的遴选原则

 利用推导出的1维半空间光致热弹性应力响应的精确解，对激光与材料相互作用的加热模型的选取进行了研究。理论分析和计算结果表明：常用的表面加热模型只有在热穿透深度远大于光吸收长度时有效，若将其应用于超短脉冲激光（ps以下量级）加热的情况，可能会导致较大的误差；皮秒和飞秒激光辐照的热效应须用体加热模型计算。     

金刚石窗口冷却Yb3+∶YAG DPSSL设计

针对高功率二极管重复率抽运的V型非稳腔Yb3+∶YAG激光头，提出了利用金刚石窗口冷却和直接水冷相结合的复合冷却设计.在YAG片的抽运面进行直接水冷，同时在激光提取面利用金刚石窗口冷却介质.金刚石优异的导热性能不仅能够有效地冷却激光介质，还能消除横向的温度梯度，解决了高功率激光器冷却和高功率抽运的矛盾.模拟结果表明对掺杂10 at %厚度为1.6 mm的Yb3+∶YAG片在抽运功率密度为20 kW/cm2，重复频率为10 Hz的条件下，要将最高温度控制在可接受的范围内（比如320 K），周围冷却水的对流换热系数约为4000 W/m2K.     

Approximate and Exact Small Signal Analysis for Single-Mode Fiber Near Zero Dispersion Wavelength with Higher Order Dispersion

This article presents the comparison of approximate and exact small-signal theories for analyzing the influence of the higher-order dispersion terms on dispersive optical communication systems operating near zero dispersion wavelength for linear single-mode fiber. For the approximate theory, the generalized conversion matrix has been reported and gives the transfer function of intensity and phase from the fiber input to fiber output for a laser source including the influence of any higher-order dispersion term. In addition, expressions for the small-signal frequency response and the relative intensity noise (RIN) response of an ultrafast laser diode including noises are derived. However, it is observed that the approximation assumed for the second-order dispersion term for the approximate analysis is not valid. From the approximate theory, the exact generalized conversion matrix and exact expressions for small-signal frequency response and relative intensity noise (RIN) are obtained. We show that for the exact theory, the second-order dispersion term has no effect on intensity and frequency response even at large modulating frequencies and large propagation distances contrary to the approximate theory as reported by other authors. But we show that third-order dispersion term certainly has some minute impact on the frequency and RIN response for long distance links at high modulating frequencies.     

The effect of microscopic features upon the transmissivity of enclosed laser ablated laminated metallised polymer films

A vacuum-deposited aluminium layer (20 nm) is sandwiched between two layers of laminated oriented polypropylene (OPP) film whose thickness varies from 20 to 40 μm. Selected areas of this sealed system were transparentised by the redistribution of the aluminium layer without breaking the seal or causing damage to the OPP film using a 75 W Q-switched Nd:YAG laser. The resultant transparentised films contain aluminium particles, distorted polymer areas and intact areas of the vacuum-coated aluminium layer. This paper investigates the effect of microscopic features upon the overall transmissivity of the laser-treated films and hence the quality of the transparentisation process.     

Two-axis-scanning laser Doppler vibrometer for precision engineering

Laser Doppler vibrometer (LVD) has been the most favorite instrument for precision dynamics measurement due to its non-contact, high accuracy and high resolution. However, LDV can only give the dynamic data of a particular location on the entire feature. In order to get the whole field data, a laser beam-scanning mechanism has to be implemented. Currently, motor-driven scanning mirror is used to move the measurement probe from one point to another. The mechanical vibrations of the scanning mirror will reduce the measurement accuracy. This paper introduces a novel scanning LDV optical system embodied in an acousto-optic deflector scanning mechanism. It can improve the measurement accuracy since there is no mechanical motion involved. One main advantage of this system is that it generates a laser scanning beam in parallel that is different from the beam scanning in the conventional scanning laser Doppler vibrometer (SLDV). The new system has a board scanning range. The measurement target size ranges from few tens of millimeters down to 10 μm. We have demonstrated the capability of the novel system on scanning measurements of features as big as ultra-precision cutting tool to features as tiny as AFM cantilever. We believe that the novel SLDV will find profound potential applications in the precision engineering field.     

Laser vaporization: A versatile method for studying metal clusters

Vaporizing solid samples of metals and semiconductors with a YAG Laser is a method well suited for producing molecules and clusters of those materials. The clusters are examined by either laser-induced fluorescence (LIF) or mass spectroscopic methods. The technique is valuable for both gas phase and matrix studies. The method is described and some applications, studying either the structure of small metal molecules or their reactions, are reviewed, with emphasis on our recent results from the LIF studies of LiBe, Al₂ and the reaction of Al with oxygen, yielding A1₂O. For larger clusters, Ion Cyclotron Resonance is an extremely valuable method, as we demonstrate by its application to the reactions of small charged silicon clusters with strong oxidising agents.     

3D molecular imaging SIMS

Thin monolayer and bilayer films of spin cast poly(methyl methacrylate) (PMMA), poly(2-hydroxyethyl methacrylate) (PHEMA), poly(lactic) acid (PLA) and PLA doped with several pharmaceuticals have been analyzed by dynamic SIMS using SF₅⁺ polyatomic primary ion bombardment. Each of these systems exhibited minimal primary beam-induced degradation under cluster ion bombardment allowing molecular depth profiles to be obtained through the film. By combing secondary ion imaging with depth profiling, three-dimensional molecular image depth profiles have been obtained from these systems. In another approach, bevel cross-sections are cut in the samples with the SF₅⁺ primary ion beam to produce a laterally magnified cross-section of the sample that does not contain the beam-induced damage that would be induced by conventional focussed ion beam (FIB) cross-sectioning. The bevel surface can then be examined using cluster SIMS imaging or other appropriate microanalysis technique.     

Laser ablation lithography on thermoelectric semiconductor

In this paper, experimental results of the investigation of the periodic structure on thermoelectric semiconductor Cu₂Se are presented. Periodic structures were formed on surfaces of semiconductors due to multi-beam interaction of Q-switched Nd:YAG laser, which was operated in the lowest order of Gaussian mode and pulse duration 7 ns. Surface temperature evolution and transient reflectivity are studied during laser treatment. Creation of Cu islands in the maximal intensity of interference pattern was found.     

The effects of flow split ratio and flow rate in manifolds

This paper reports a combined experimental and numerical investigation of three-dimensional steady turbulent flows in inlet manifolds of square cross-section. Predictions and measurements of the flows were carried out using computational fluid dynamics and laser Doppler anemometry techniques respectively. The flow structure was characterized in detail and the effects of flow split ratio and inlet flow rate were studied. These were found to cause significant variations in the size and shape of recirculation regions in the branches, and in the turbulence levels. It was then found that there is a significant difference between the flow rates through different branches. The performance of the code was assessed through a comparison between predictions and measurements. The comparison demonstrates that all important features of the flow are well represented by the predictions.